Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 05MBL1, a Linde Lift Truck Corp item with the NSN 3020002002111 that is listed alongside the description “Gear Helical.” If you are interested in part number 05MBL1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 05MBL1 is specifically listed with the NSN 3020-00-200-2111, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Linde Lift Truck Corp, this NSN part was specifically produced under CAGE Code 05415. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2111 Item PartTypeName: GEAR,HELICAL | 3020 | 002002111 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 643358 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.4780 INCHES MINIMUM AND 6.4800 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 50 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 12.7 ROCKWELL C MINIMUM OVERALL AND 21.7 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.6775 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 39.5167 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.875 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.2495 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.251 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.7457 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| CWWH | END NOMINAL LENGTH | 0.077 INCHES SECOND END |
| CWWN | END NOMINAL DIAMETER | 1.936 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.031 INCHES SECOND END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.750 INCHES SECOND END |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
