Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 3M1169C4-6A, a Linread Canada Ltd item with the NSN 5305014782887 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number 3M1169C4-6A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 3M1169C4-6A is specifically listed with the NSN 5305-01-478-2887, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Linread Canada Ltd, this NSN part was specifically produced under CAGE Code K8753. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-478-2887 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014782887 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1169C4-6A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 |
| AASB | FASTENER LENGTH | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASU | HEAD HEIGHT | 0.110 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 240 POUNDS PER SQUARE INCH |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INCONEL718 MFR REF 1ST MATERIAL RESPONSE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
