Request a Quote for 272T6061001-001 Lockheed Martin Corporation Part With the NSN 5307-00-401-8575 Today

Part Number: 272T6061001-001

Alternate P/N: 272T6061001001

Manufacturer: Lockheed Martin Corporation

NSN: 5307-00-401-8575

NIIN: 004018575

Item Name : Stud Shouldered And

CAGE Code: 38597

FSC: 5307 Studs

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 272T6061001-001, a Lockheed Martin Corporation item with the NSN 5307004018575 that is listed alongside the description “Stud Shouldered And.” If you are interested in part number 272T6061001-001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 272T6061001-001 is specifically listed with the NSN 5307-00-401-8575, and this code can be used to determine that it falls under FSC 5307 Studs. Additionally, while tracing back to Lockheed Martin Corporation, this NSN part was specifically produced under CAGE Code 38597. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 272T6061001-001 with NSN 5307-00-401-8575, 5307004018575

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5307-00-401-8575 Item PartTypeName: STUD,SHOULDERED AND STEPPED	5307	004018575	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
272T6061001-001	2	2	3

Characteristics Data of NSN 5307-00-401-8575, 5307004018575

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A NUT THREAD
AAJD	THREAD CLASS	3A STUD THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND NUT THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND STUD THREAD
AASA	THREAD LENGTH	0.227 INCHES MINIMUM STUD THREAD AND 0.310 INCHES MAXIMUM STUD THREAD
AASA	THREAD LENGTH	0.500 INCHES NOMINAL NUT THREAD
AAVH	SHOULDER DIAMETER	0.562 INCHES NOMINAL
AAVK	SHOULDER LENGTH	0.437 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.371 INCHES NOMINAL
ADDB	NUT END SHANK LENGTH	0.520 INCHES NOMINAL
ADDU	DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END	0.090 INCHES NOMINAL FIRST HOLE
ADDU	DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END	2.280 INCHES NOMINAL SECOND HOLE
ADDV	COTTER PIN HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
AWTQ	DISTANCE ACROSS FLATS	0.437 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	24 STUD THREAD
CMLP	THREAD QUANTITY PER INCH	28 NUT THREAD
CQJX	NOMINAL THREAD SIZE	0.250 INCHES NUT THREAD
CQJX	NOMINAL THREAD SIZE	0.312 INCHES STUD THREAD
CSJZ	STUD END SHANK LENGTH	0.605 INCHES NOMINAL
CSXH	STUD END SHANK DIAMETER	0.310 INCHES NOMINAL
CTDT	NUT END SHANK DIAMETER	0.248 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 4130
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
STYL	STYLE DESIGNATOR	SHOULDERED AND STEPPED
THSD	THREAD SERIES DESIGNATOR	UNF NUT THREAD
THSD	THREAD SERIES DESIGNATOR	UNF STUD THREAD