Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 873369, a Lockheed Martin Corporation item with the NSN 5340003303564 that is listed alongside the description “Bracket Angle.” If you are interested in part number 873369 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 873369 is specifically listed with the NSN 5340-00-330-3564, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Lockheed Martin Corporation, this NSN part was specifically produced under CAGE Code 56232. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-330-3564 Item PartTypeName: BRACKET,ANGLE | 5340 | 003303564 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 873369 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.2500 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 1.0000 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| AHLH | SECOND LEG END WIDTH | 0.562 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.164 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.512 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 0.562 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.250 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CHAMFERED ENDS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | CHAMFERED ENDS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 2ND LEG HAS 0.250 IN. WITH SLOT CENTERED IN EDGE ALONG WIDTH THRU TO HOLE; HOLE HAS KEYWAY AT 30 DEG ANGLE FROM CENTER OF WIDTH AT BEND |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-318,COND.1/2H MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ENAMEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-E-15090 TYPE 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
