Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 7223233P1, a Lockheed Martin Corporation item with the NSN 5340011399992 that is listed alongside the description “Bracket Angle.” If you are interested in part number 7223233P1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 7223233P1 is specifically listed with the NSN 5340-01-139-9992, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Lockheed Martin Corporation, this NSN part was specifically produced under CAGE Code 99971. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-139-9992 Item PartTypeName: BRACKET,ANGLE | 5340 | 011399992 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7223233P0001 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 2ND LEG HAS CUT-OUT 0.440 IN. LG BY 0.385 IN. DP; BRACKET,BEARING |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 TEMP T4 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE AND PRIMER AND ENAMEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E12 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-22808 MED GRAY MIL SPEC 3RD TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLK | FIRST LEG LENGTH | 0.460 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.570 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.840 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.140 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.096 INCHES NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.640 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.100 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.053 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.053 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.840 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.420 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.210 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
