Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number A25A209-006-101, a Lockheed Martin Corporation item with the NSN 5990008841743 that is listed alongside the description “Synchro Control Transformer.” If you are interested in part number A25A209-006-101 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number A25A209-006-101 is specifically listed with the NSN 5990-00-884-1743, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Lockheed Martin Corporation, this NSN part was specifically produced under CAGE Code 99696. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-884-1743 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008841743 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A25A209-006-101 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2492 INCHES MINIMUM SINGLE SHAFT AND 0.2497 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 45.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 MAXIMUM |
| AJSP | STATOR INPUT CURRENT RATING | 7.7 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 80.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 10.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 2.1345 INCHES MINIMUM AND 2.1350 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.5710 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2970 INCHES MINIMUM AND 2.3000 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 2.2090 INCHES MINIMUM AND 2.2150 INCHES MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 1495.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 675.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -1.0/1.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 0.8370 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 11870.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 741.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
