Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number A16IN, a Lodge And Shipley Manuflux item with the NSN 3416008283714 that is listed alongside the description “Lathe Engine.” If you are interested in part number A16IN and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number A16IN is specifically listed with the NSN 3416-00-828-3714, and this code can be used to determine that it falls under FSC 3416 Lathes. Additionally, while tracing back to Lodge And Shipley Manuflux, this NSN part was specifically produced under CAGE Code 80315. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | 51 INDICATOR,THD DIAL,LATHE;4 JAW,FACEPLATE,6 IN.;1 KNURLING TOOL,SELFCENTERING,LATHE,5/8 BY 1-3/8 IN.;1 REST STEADY,LATHE ROLLER JAWS;1 SOCKET,TAPER SHANK TOOL,EXTENSION,NO. 4 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 2 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 3 MORSETAPER SHANK;1 STOP,CARRIAGE,LATHE MICROMETER;1 STOP,THD CUTTING,LATHE;1 TAPER ATTACHMENT,LATHE;1 TOOL POST,LATHE;1WRENCH,OPEN END;1 WRENCH,SPANNER;1 WRENCH,T HANDLE;1 WRENCH,TAILSTOCK;1 WRENCH,TOOL POST" |
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 3.0 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +25.0/+1500.0 |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 10.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| AKYD | Accessory Components And Quantity | 1 ADAPTER,HEADSTOCK,1-1/2 IN. DIA;1 ADAPTER,TAILSTOCK,1-1/2 IN. DIA;1 BAG,CANVAS,TRANSPOSING GEARS;1 BUSHING,SPINDLE;3 CENTER,LATHE,HARDENED;1 CHUCK,COLLECT SPINDLE NOSE,9 IN.;1 CHUCK,DRILL,1/8 THRU 5/8 IN. CAPACITY;1 CHUCK,INDEPENDENT JAW,6 IN.;1 CHUCK,INDEPENDENT JAW,10 IN.;1 CHUCK,UNIVERSAL JAW,5 IN.;1 COLLAR,LATHE METRIC TRANSPORING GEAR;1 COLLAR SET,MACHINE,1/16 THRU 1-3/8 IN.;1 COVER,LATHE,CANVAS;1 DOG,LATHE,1/2 IN.CAPACITY;1 DOG,LATHE,1-1/4IN. CAPACITY;1 DRIFT SET,DRILL SIZES 1-2 AND 3;1 FACEPLATE,METALWORKING,LATHE 9 IN. DIA;1 FACEPLATE,METALWORKING,LATHE 24 IN. DIA;1 GEAR SET,LATHE METRIC TRANSPOSING TO CUT .25 TO 2.50 MM;1 HOLDER,CUTTING TOOL BORING;1 HOLDER,CUTTING TOOL BORING 5/8 BY 1-1/4 IN.;1HOLDER,CUTTING TOOL,RH OFFSET,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-1/4 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TUNNING,LH,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TURNING,RH 5/8 BY 1-3/8 IN." |
| BTWC | Rated Swing Through Open Gap | 26.000 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 17.000 INCHES NOMINAL |
| BTWG | Actual Swing Over Closed Gap | 17.750 INCHES NOMINAL |
| FREQ | Frequency In Hertz | 60.0 |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTWM | Headstock Center Taper Size Designator | 4 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.766 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +2.0/+112.0 PER INCH |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
