Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 99070-008-26, a Lucas Aerospace Ltd item with the NSN 1680005404415 that is listed alongside the description “Shaft Assembly Flexible.” If you are interested in part number 99070-008-26 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 99070-008-26 is specifically listed with the NSN 1680-00-540-4415, and this code can be used to determine that it falls under FSC 1680 Miscellaneous Aircraft Accessories Components. Additionally, while tracing back to Lucas Aerospace Ltd, this NSN part was specifically produced under CAGE Code 31435. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-540-4415 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE | 1680 | 005404415 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 99070-008-26 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.304 INCHES MINIMUM AND 0.310 INCHES MAXIMUM BOTH ENDS |
| ABHP | OVERALL LENGTH | 9.750 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| ABSC | SPLINE MINOR DIAMETER | 0.240 INCHES MINIMUM AND 0.242 INCHES MAXIMUM BOTH ENDS |
| AECT | THREAD DEPTH | 0.281 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.468 INCHES NOMINAL BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| AKMH | CORE DIAMETER | 0.250 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND,INTERNAL SPLINED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL BOTH ENDS |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| AXFH | SPLINE LENGTH | 0.232 INCHES MINIMUM AND 0.255 INCHES MAXIMUM BOTH ENDS |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS |
| CFRM | TORSIONAL DEFLECTION RATING | 4 DEG FT-LB IN. TORSIONAL DEFLECTION IN WINDING DIRECTION,5 DEG FT-LB IN. IN UNWINDING DIRECTION |
| CFRP | CASING LENGTH BETWEEN FERRULES | 8.7812 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.434 INCHES MINIMUM AND 0.446 INCHES MAXIMUM |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRX | OVERALL END SIZE | BOTH ENDS: 0.750 IN. HEX |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 9.750 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 3.000 INCHES |
| ZZZV | FSC APPLICATION DATA | ELEVATOR ASSY,LEFT HAND,AIRCRAFT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
