Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 2723, a Marine Engine Specialties item with the NSN 3020004994242 that is listed alongside the description “Gear Spur.” If you are interested in part number 2723 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 2723 is specifically listed with the NSN 3020-00-499-4242, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Marine Engine Specialties, this NSN part was specifically produced under CAGE Code 16460. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-499-4242 Item PartTypeName: GEAR,SPUR | 3020 | 004994242 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2723 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB,FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 AXIALLY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.312 INCHES AXIALLY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.000 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.2500 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.3750 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.8755 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.1870 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5295 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.2500 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.6625 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.125 INCHES AXIALLY THROUGH HUB,FIRST END |
| FEAT | SPECIAL FEATURES | POSITION OF KEYWAY MUST BE CENTERED BETWEEN TEETH |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
