Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number A505-2, a Mas Components And Coatings Llc item with the NSN 1680005546592 that is listed alongside the description “Shaft Assembly Flexible.” If you are interested in part number A505-2 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number A505-2 is specifically listed with the NSN 1680-00-554-6592, and this code can be used to determine that it falls under FSC 1680 Miscellaneous Aircraft Accessories Components. Additionally, while tracing back to Mas Components And Coatings Llc, this NSN part was specifically produced under CAGE Code 48ZY0. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-554-6592 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE | 1680 | 005546592 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8374-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | 0.270 INCHES NOMINAL BOTH ENDS |
| ABHP | OVERALL LENGTH | 65.043 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.062 INCHES NOMINAL BOTH ENDS |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| ABSC | SPLINE MINOR DIAMETER | 0.228 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.521 INCHES NOMINAL BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.562 INCHES NOMINAL BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AKMH | CORE DIAMETER | 0.276 INCHES NOMINAL |
| APTD | END TYPE | ROUND,INTERNAL SPLINED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.870 INCHES NOMINAL BOTH ENDS |
| AWZY | END CONNECTION TYPE | SHOULDERED FERRULE BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.420 INCHES NOMINAL DIAMETER BOTH ENDS |
| CFRM | TORSIONAL DEFLECTION RATING | 30 DEG FT-LB IN. |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED |
| CFRP | CASING LENGTH BETWEEN FERRULES | 64.000 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.530 INCHES NOMINAL |
| CFRR | CASING PROTECTIVE DEVICE TYPE | BRAIDED WIRE SHIELD |
| CFRT | SWIVEL END | PROVIDED BOTH ENDS |
| CFRW | END OVERALL DIAMETER | 0.620 INCHES NOMINAL BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 65.043 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 12.000 INCHES |
| ZZZV | FSC APPLICATION DATA | ACTUATORS,MECHANICAL,TRIM TAB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
