Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 555-22, a Mas Components And Coatings Llc item with the NSN 3020006711555 that is listed alongside the description “Gear Spur.” If you are interested in part number 555-22 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 555-22 is specifically listed with the NSN 3020-00-671-1555, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Mas Components And Coatings Llc, this NSN part was specifically produced under CAGE Code 48ZY0. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-671-1555 Item PartTypeName: GEAR,SPUR | 3020 | 006711555 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 555-22 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 1.6250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 52 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.688 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES FIRST END |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.250 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.312 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.313 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 0.375 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.563 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.188 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 1.203 INCHES FIRST END |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.078 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COMP 4130,C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB,RECESSED BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
