Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number R58HB04C44W008, a Mcdonnell Douglas Corp item with the NSN 5975014341758 that is listed alongside the description “Conduit Assembly Nonmetallic Ele.” If you are interested in part number R58HB04C44W008 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number R58HB04C44W008 is specifically listed with the NSN 5975-01-434-1758, and this code can be used to determine that it falls under FSC 5975 Electrical Hardware and Supplies. Additionally, while tracing back to Mcdonnell Douglas Corp, this NSN part was specifically produced under CAGE Code 12464. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-434-1758 Item PartTypeName: CONDUIT ASSEMBLY,NONMETALLIC,ELE | 5975 | 014341758 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R58HB04C44W008 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B BOTH ENDS" |
| ABEZ | GRIPPING ACCOMMODATION TYPE | ROUND KNURLED BOTH ENDS" |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| ACKE | BRAIDED METALLIC SHIELD TYPE | TINNED COPPER WIRE" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.060 INCHES" |
| ADAR | BODY OUTSIDE DIAMETER | 0.640 INCHES MAXIMUM" |
| ADAS | BODY INSIDE DIAMETER | 0.312 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | F-15S" |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 8.000 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | GROUND WIRE INCLUDED" |
| FLEX | III FLEXIBILITY | FLEXIBLE" |
| MATT | MATERIAL | ALUMINUM ALLOY COMPLETE END FITTING" |
| MATT | MATERIAL | PLASTIC BODY" |
| MATT | MATERIAL | STEEL CORROSION RESISTING CHAFING SLEEVE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-81914/4 MIL SPEC SINGLE MATERIAL RESPONSE BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/3,2011-T3 FED SPEC SINGLE MATERIAL RESPONSE COMPLETE END FITTING" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE CHAFING SLEEVE" |
| SFTT | SURFACE TREATMENT | CHROMATE COMPLETE END FITTING" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE COMPLETE END FITTING" |
| AAJD | THREAD CLASS | 2B BOTH ENDS" |
| ABEZ | GRIPPING ACCOMMODATION TYPE | ROUND KNURLED BOTH ENDS" |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| ACKE | BRAIDED METALLIC SHIELD TYPE | TINNED COPPER WIRE" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.060 INCHES" |
| ADAR | BODY OUTSIDE DIAMETER | 0.640 INCHES MAXIMUM" |
| ADAS | BODY INSIDE DIAMETER | 0.312 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | F-15S" |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 8.000 INCHES NOMINAL WORKING" |
| FEAT | SPECIAL FEATURES | GROUND WIRE INCLUDED" |
| FLEX | III FLEXIBILITY | FLEXIBLE" |
| MATT | MATERIAL | ALUMINUM ALLOY COMPLETE END FITTING" |
| MATT | MATERIAL | PLASTIC BODY" |
| MATT | MATERIAL | STEEL CORROSION RESISTING CHAFING SLEEVE" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-81914/4 MIL SPEC SINGLE MATERIAL RESPONSE BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/3,2011-T3 FED SPEC SINGLE MATERIAL RESPONSE COMPLETE END FITTING" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE CHAFING SLEEVE" |
| SFTT | SURFACE TREATMENT | CHROMATE COMPLETE END FITTING" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE COMPLETE END FITTING" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
