Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 01712-12-FJX-SS-SPEC END-18.875, a Mid State Sales Inc item with the NSN 4720014853746 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 01712-12-FJX-SS-SPEC END-18.875 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 01712-12-FJX-SS-SPEC END-18.875 is specifically listed with the NSN 4720-01-485-3746, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Mid State Sales Inc, this NSN part was specifically produced under CAGE Code 62727. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-485-3746 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014853746 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 01712-12-FJX-SS-SPEC END-18.875 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | Flange Thickness | 0.380 INCHES NOMINAL 2ND END |
| AGAV | End Item Identification | TORPEDO, CONSOLE |
| CXCY | Part Name Assigned By Controlling Agency | HOSE ASSEMBLY, WATER INLET |
| AGFF | Flange Width | 1.500 INCHES NOMINAL 2ND END |
| AECS | Bolt Hole Quantity | 2 2ND END |
| ABKV | Outside Diameter | 1.750 INCHES NOMINAL |
| AJEE | Raised Face Diameter | 1.076 INCHES MINIMUM AND |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| ACKH | Minimum Inside Bending Radius | 6.000 INCHES |
| CTCJ | Flange Style | OVAL 2ND END |
| CQCS | Layer Composition And Location | 2ND LAYER BRAIDED TEXTILE YARN AND |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CQGM | Maximum Operating Pressure | 750.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AJED | Raised Face Height | 0.500 INCHES NOMINAL 2ND END |
| AJEE | Raised Face Diameter | 1.080 INCHES MAXIMUM 2ND END |
| AFQN | Flange Length | 2.438 INCHES NOMINAL 2ND END |
| AKUT | End Flange Construction | SOLID 2ND END |
| AAJD | Thread Class | 3B 1ST END |
| AKUU | End Connection Design | STRAIGHT 2ND END |
| CRJM | Outer Covering Environmental Protection | ABRASION RESISTANT AND |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| ABKG | Bolt Circle Diameter | 1.938 INCHES NOMINAL 2ND END |
| AWLS | Connection Type | RAISED FACE FLANGE 2ND END |
| CRXX | Measuring Method And Length | 19.500 INCHES NOMINAL OVERALL |
| AARX | Inside Diameter | 0.750 INCHES NOMINAL |
| CQBD | Burst Test Pressure | 3000.0 POUNDS PER SQUARE INCH |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND |
| MRC | Decoded Requirement | Clear Text Reply |
| CRJM | Outer Covering Environmental Protection | WEATHERPROOF |
| FEAT | Special Features | THE SECOND END ALSO HAS AN UNTHREADED TUBE CONNECTION LIKE DRAWING GROUP F, STYLE 2, IT IS RAISED .500" FROM THE FLANGE FACE AND HAS A DIAMETER OF 1.244". THE .137" WIDE GROOVE HAS AN OVERALL DIAMETER OF1.078 |
| AHNC | Connection Style | RAISED 2ND END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CMLP | Thread Quantity Per Inch | 12 1ST END |
| CQJX | Nominal Thread Size | 1.062 INCHES 1ST END |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AHNX | Bolt Hole Diameter | 0.270 INCHES MINIMUM AND |
| AHNX | Bolt Hole Diameter | 0.284 INCHES MAXIMUM 2ND END |
| CQCS | Layer Composition And Location | 1ST LAYER HELIX CORROSION RESISTANT STEEL COIL AND |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| ADJS | Exterior Color | BLACK |
| THSD | Thread Series Designator | UN 1ST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
