Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-DTL-13531, a Military Specifications item with the NSN 4720013747814 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number MIL-DTL-13531 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-DTL-13531 is specifically listed with the NSN 4720-01-374-7814, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-374-7814 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013747814 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-DTL-13531 | 1 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | 2350-00-808-7100 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAJD | THREAD CLASS | 2B 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.220 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | MIL-H-13531,TYPE 3,CLASS A-81349 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND A CLASS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 31.250 INCHES MINIMUM WORKING AND 31.750 INCHES MAXIMUM WORKING |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION-OVERALL SPRING GUARD,FLAT STEEL COIL,INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC; BAND THREE PLACES PER MS43436/5-1 |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
