Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-B-23964, a Military Specifications item with the NSN 5305013592298 that is listed alongside the description “Screw Close Toleran.” If you are interested in part number MIL-B-23964 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-B-23964 is specifically listed with the NSN 5305-01-359-2298, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-359-2298 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013592298 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-B-23964 | 5 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.181 INCHES MINIMUM FIRST HOLE AND 1.161 INCHES MAXIMUM FIRST HOLE |
| AASA | THREAD LENGTH | 0.367 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| AASK | HEAD STYLE | CROWNED HEXAGON |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRINGQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 1.289 INCHES MINIMUM AND 1.309 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| CQBC | MINIMUM TENSILE STRENGTH | 90000 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | TWO LOCKING BALLS OR ELEMENTS ON GRIP |
| MATT | MATERIAL | NICKEL ALLOY 600 SPRING OR NICKEL ALLOY X-750 SPRINGIRON ALLOY 660 FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-390 FED SPEC 1ST MATERIAL RESPONSE SPRING OR AMS5699 ASSN STD 2ND MATERIAL RESPONSE SPRINGAMS5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRINGPASSIVATE FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
