Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-R-22-3, a Military Specifications item with the NSN 5905002792351 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number MIL-R-22-3 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-R-22-3 is specifically listed with the NSN 5905-00-279-2351, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-279-2351 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 002792351 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-R-22-3 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.957 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.680 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.453 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.410 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.260 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 40.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 275.0 MINIMUM AND 305.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 HEAT SINK SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22/3 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
