Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-PRF-22/7, a Military Specifications item with the NSN 5905008062920 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number MIL-PRF-22/7 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-PRF-22/7 is specifically listed with the NSN 5905-00-806-2920, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-806-2920 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008062920 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MILR22-7 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| ABHP | OVERALL LENGTH | 2.702 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.344 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.780 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 3.225 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 48.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 310.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 75.0 HEAT SINK SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MILR22-7 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
| ABNC | FLAT HEIGHT | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.810 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AEFM | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 3.000 OHMS SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
