Request a Quote for M39015/2-008WP Military Specifications Part With the NSN 5905-01-019-5055 Today

Part Number: M39015/2-008WP

Alternate P/N: M390152008WP

Manufacturer: Military Specifications

NSN: 5905-01-019-5055

NIIN: 010195055

Item Name : Resistor Variable Wire Wound Non

CAGE Code: 81349

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number M39015/2-008WP, a Military Specifications item with the NSN 5905010195055 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number M39015/2-008WP and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number M39015/2-008WP is specifically listed with the NSN 5905-01-019-5055, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number M39015/2-008WP with NSN 5905-01-019-5055, 5905010195055

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-019-5055 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	010195055	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	G	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
M39015/02-008W	B	1	C			A

Characteristics Data of NSN 5905-01-019-5055, 5905010195055

MRC	Criteria	Characteristic
CBME	CUBIC MEASURE	0.052 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	8280.0 MINIMUM AND 13680.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACE GOLD
PRMT	PRECIOUS MATERIAL	GOLD
TEST	TEST DATA DOCUMENT	81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES
AARG	RELIABILITY INDICATOR	ESTABLISHED
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
ABJT	TERMINAL LENGTH	0.187 INCHES MINIMUM
ABTB	MOUNTING HOLE DIAMETER	0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.045 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.540 INCHES MAXIMUM
ADAT	BODY WIDTH	0.230 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	8280.0 MINIMUM AND 13680.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	10.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	10.00 INCH-OUNCES
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
AKPV	MOUNTING FACILITY QUANTITY	2
APXH	TERMINAL LOCATION	REAR END
AXGY	MOUNTING METHOD	UNTHREADED HOLE
CBBL	FEATURES PROVIDED	HUMIDITY PROOF