Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number M20708/500-001, a Military Specifications item with the NSN 5990001109441 that is listed alongside the description “Synchroreceiver.” If you are interested in part number M20708/500-001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number M20708/500-001 is specifically listed with the NSN 5990-00-110-9441, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-110-9441 Item PartTypeName: SYNCHRO,RECEIVER | 5990 | 001109441 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-S-20708/500 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0625 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6750 INCHES MINIMUM AND 0.6810 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/50 GOVERNMENT SPECIFICATION |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.5460 INCHES MINIMUM AND 1.5760 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3060 INCHES MINIMUM AND 0.3360 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 142.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 620.0 MILLIWATTS NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 11.00 NOMINAL |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 15.000 NOMINAL |
| AJTQ | ZSO-90 IMPEDANCE MAGNITUDE IN OHMS | 15.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -60.0 TO 60.0 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -60.0 TO 60.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 2200.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
