Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 15CX6C, a Military Specifications item with the NSN 5990004918613 that is listed alongside the description “Synchro Transmitter.” If you are interested in part number 15CX6C and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 15CX6C is specifically listed with the NSN 5990-00-491-8613, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Military Specifications, this NSN part was specifically produced under CAGE Code 81349. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-491-8613 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 004918613 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCX15-6D2-107 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0110 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | LD616647 |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 360.0 MILLIWATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 5335.00 MINIMUM AND 6265.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 80.00 MINIMUM AND 83.00 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 675.00 MINIMUM AND 825.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 11.00 MINIMUM AND 16.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 45.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| AJWH | SHAFT END PLAY | 0.0010 INCHES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5280 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0004 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2100 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
