Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS21221-4K, a Military Standards Corp item with the NSN 3110013629812 that is listed alongside the description “Bearing Roller Rod.” If you are interested in part number MS21221-4K and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS21221-4K is specifically listed with the NSN 3110-01-362-9812, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-362-9812 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 013629812 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21221-4K | 6 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4620 OR STEEL COMP 4130 OR STEEL COMP 8620 OR STEEL COMP E52100 SUPPORTING SLEEVE |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAZE | SHANK DIAMETER | 0.3750 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.3700 INCHES MINIMUM AND 2.3900 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3750 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.9800 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8300 INCHES MINIMUM AND 1.8500 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| FEAT | SPECIAL FEATURES | INTERNAL CLEARANCE 0.0002 IN. MIN 0.0010 IN. MAX; KEYWAY IN SHANK |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
