Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS21243S03L, a Military Standards Corp item with the NSN 3120013427760 that is listed alongside the description “Bearing Plain Rod End.” If you are interested in part number MS21243S03L and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS21243S03L is specifically listed with the NSN 3120-01-342-7760, and this code can be used to determine that it falls under FSC 3120 Bearings Plain Unmounted. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-342-7760 Item PartTypeName: BEARING,PLAIN,ROD END | 3120 | 013427760 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M81935/2-03L | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| ABHP | OVERALL LENGTH | 1.7780 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM |
| AGHA | INSPECTION HOLE CENTER TO END DISTANCE | 0.3745 INCHES NOMINAL |
| AGHB | SHANK WIDTH ACROSS WRENCH FLATS | 0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| STYL | STYLE DESIGNATOR | BALL TYPE |
| AWDP | THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| CQFM | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| MATT | MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATT | MATERIAL | STEEL COMP 630 RACE INSERT |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES ROD END BODY |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3B |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| AGGH | OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM |
| AGGJ | INNER MEMBER WIDTH | 0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGKP | STATIC RADIAL LOAD RATING | 2360 POUNDS |
| MATT | MATERIAL | STEEL COMP E4340 ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
