Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS8005E120E170, a Military Standards Corp item with the NSN 4720013991875 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number MS8005E120E170 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS8005E120E170 is specifically listed with the NSN 4720-01-399-1875, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-399-1875 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013991875 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-DTL-25579 | 2 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 12.000 INCHES NOMINAL WORKING |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 170.0 |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.4375 INCHES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC,POLYTETRAFLUOROETHYLENE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE OUTER LAYER BRAIDED STEEL WIRE |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.343 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CQRB | SEAT ANGLE | 90.0 DEGREES 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
