Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS21949W4L, a Military Standards Corp item with the NSN 4730006320474 that is listed alongside the description “Bolt Fluid Passage.” If you are interested in part number MS21949W4L and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS21949W4L is specifically listed with the NSN 4730-00-632-0474, and this code can be used to determine that it falls under FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
4730-00-632-0474 Item PartTypeName: BOLT,FLUID PASSAGE | 4730 | 006320474 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
MS21949-4L | 6 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | BODY WRENCHING |
AAWX | CONCENTRIC HOLE DEPTH | 1.750 INCHES NOMINAL |
AAXC | CONCENTRIC HOLE DIAMETER | 0.172 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 2.332 INCHES NOMINAL |
ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
ACKN | FIRST END STYLE DESIGNATOR | PLAIN |
ACLK | FIRST END THREAD CLASS | 3A |
ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
ACLT | SECOND END STYLE DESIGNATOR | FLARED |
ACMR | SECOND END THREAD CLASS | 3A |
ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
ASDB | WIDTH ACROSS FLATS | 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM |
ATKZ | FIRST END THREAD LENGTH | 0.239 INCHES NOMINAL |
ATLF | SECOND END THREAD LENGTH | 0.550 INCHES NOMINAL |
BBDF | WRENCHING FEATURE STYLE | HEXAGON |
BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.425 INCHES NOMINAL |
BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.433 INCHES NOMINAL |
BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | 0.363 INCHES NOMINAL |
BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.052 INCHES NOMINAL |
BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 0.354 INCHES NOMINAL |
BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 0.666 INCHES NOMINAL |
BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 1.027 INCHES NOMINAL |
BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | 1.199 INCHES NOMINAL |
BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.189 INCHES NOMINAL |
BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.898 INCHES NOMINAL |
BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.438 INCHES NOMINAL |
BBLF | WRENCHING FEATURE HEIGHT | 0.334 INCHES NOMINAL |
CQKK | FIRST END THREAD QUANTITY PER INCH | 20 |
CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
CQYM | FIRST END NOMINAL THREAD SIZE | 0.437 INCHES |
CRCN | SECOND END SEAT ANGLE | 37.0 DEGREES NOMINAL |
CRMX | SECOND END THREAD QUANTITY PER INCH | 20 |
CRNB | SECOND END NOMINAL THREAD SIZE | 0.437 INCHES |
CRPF | SECOND END THREAD SERIES DESIGNATOR | UNF |
MATT | MATERIAL | ALUMINUM ALLOY |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/3,ALLOY 2014,T4 FED SPEC SINGLE MATERIAL RESPONSE |
SFTT | SURFACE TREATMENT | ANODIZE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote