INSTANT RFQ

Request a Quote for MS21078-3 Military Standards Corp Part With the NSN 5310-00-728-5510 Today

Part Number: MS21078-3
Alternate P/N: MS210783
Manufacturer: Military Standards Corp
NIIN: 007285510
CAGE Code: 96906
FSG: 53 Hardware and Abrasives
Country: USA
NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS21078-3, a Military Standards Corp item with the NSN 5310007285510 that is listed alongside the description “Nut Self Locking Plate.” If you are interested in part number MS21078-3 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS21078-3 is specifically listed with the NSN 5310-00-728-5510, and this code can be used to determine that it falls under FSC 5310 Nuts and Washers. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number MS21078-3 with NSN 5310-00-728-5510, 5310007285510

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5310-00-728-5510

Item PartTypeName:

NUT,SELF-LOCKING,PLATE

53100072855100N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
MS21078-3323

Characteristics Data of NSN 5310-00-728-5510, 5310007285510

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAUMLOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
ADEBPLATE THICKNESS0.075 INCHES MAXIMUM
ADECPLATE WIDTH0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
ADFUMOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATTMATERIALPLASTIC POLYAMIDE LOCKING INSERT
MATTMATERIALSTEEL NUT
SFTTSURFACE TREATMENTCADMIUM OVERALL EXCEPT INSERT AND CHROMATE OVERALL EXCEPT INSERT
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
ABTBMOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
ACTANUT STYLEPLATE
ACVNNUT LENGTH0.984 INCHES MAXIMUM
ADEANUT HEIGHT0.234 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
ADFPNUT MOUNTING PROVISIONSTRAIGHT HOLES
ADFWDISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
ADFYCENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
AZKQTEMP RATING250.0 DEG FAHRENHEIT NOMINAL
BZRRTHREAD SERIESUNJF
CMLPTHREAD QUANTITY PER INCH32
CQFMHARDNESS RATING32.0 ROCKWELL C MAXIMUM
CQJXNOMINAL THREAD SIZE0.190 INCHES

Related NSN Components of MS21078 3

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top