Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MS9592-214, a Military Standards Corp item with the NSN 5340004333722 that is listed alongside the description “Bracket Angle.” If you are interested in part number MS9592-214 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MS9592-214 is specifically listed with the NSN 5340-00-433-3722, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Military Standards Corp, this NSN part was specifically produced under CAGE Code 96906. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-433-3722 Item PartTypeName: BRACKET,ANGLE | 5340 | 004333722 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS9592-214 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.500 INCHES NOMINAL |
| AJFQ | SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
