Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number ST9M496V-C1W, a Miller Charles And Co Inc item with the NSN 5340012867222 that is listed alongside the description “Bracket Angle.” If you are interested in part number ST9M496V-C1W and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number ST9M496V-C1W is specifically listed with the NSN 5340-01-286-7222, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Miller Charles And Co Inc, this NSN part was specifically produced under CAGE Code 85697. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-286-7222 Item PartTypeName: BRACKET,ANGLE | 5340 | 012867222 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST9M496V-C1W | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.800 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.188 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.300 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.438 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.499 INCHES NOMINAL |
| AHMA | SECOND LEG SLOT WIDTH | 0.224 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | INCL CRES CLIP NUT |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9046,COMP CP-1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-T-9046,COMP CP-3 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 4901 ASSN STD 3RD MATERIAL RESPONSE OR AMS 4902 ASSN STD 4TH MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
