Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number WF312-11, a Monogram Aerospace Fasteners Inc item with the NSN 5320007827568 that is listed alongside the description “Rivet Blind.” If you are interested in part number WF312-11 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number WF312-11 is specifically listed with the NSN 5320-00-782-7568, and this code can be used to determine that it falls under FSC 5320 Rivets. Additionally, while tracing back to Monogram Aerospace Fasteners Inc, this NSN part was specifically produced under CAGE Code 98524. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-782-7568 Item PartTypeName: RIVET,BLIND | 5320 | 007827568 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WF312-11 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF | SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| AAZG | HEAD MAJOR DIAMETER | 0.626 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ABAJ | LUBRICATION | GREASE FILM |
| ANEE | GRIP LENGTH | 0.657 INCHES MINIMUM AND 0.769 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT |
| MATT | MATERIAL | STEEL COMP 304 SLEEVE |
| MATT | MATERIAL | STEEL COMP 8740 STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| SFTT | SURFACE TREATMENT | CADMIUM BOLT AND CHROMATE BOLT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT AND CHROMATE NUT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT |
| CQSX | SHEAR STRENGTH | 146000 DOUBLE POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| HEAT | HEAT TREATMENT | ANNEALED OVERALL |
| MATT | MATERIAL | STEEL COMP 8740 BODY |
| SFTT | SURFACE TREATMENT | CADMIUM SLEEVE AND PASSIVATE SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
