Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number CS15DS1, a Moog Inc item with the NSN 5990005535063 that is listed alongside the description “Resolver Electrical.” If you are interested in part number CS15DS1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number CS15DS1 is specifically listed with the NSN 5990-00-553-5063, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Moog Inc, this NSN part was specifically produced under CAGE Code 99932. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-553-5063 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 005535063 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AY2215-38B | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1310 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 18.2 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 14.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 60.0 MILLIWATTS NOMINAL |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 11.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 60.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 510.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 250.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 375.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 160.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.700 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 30.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 10.0 CENTIMETER-GRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6310 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2500.00 NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM SINGLE SHAFT AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1350.00 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0210 INCHES MINIMUM SINGLE SHAFT AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.5000 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
