Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number TTH11ES4, a Moog Inc item with the NSN 5990008274891 that is listed alongside the description “Synchro Control Transformer.” If you are interested in part number TTH11ES4 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number TTH11ES4 is specifically listed with the NSN 5990-00-827-4891, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Moog Inc, this NSN part was specifically produced under CAGE Code 99932. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-827-4891 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 008274891 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ES1607A-3B01 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.2380 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSP | STATOR INPUT CURRENT RATING | 165.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 250.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 78.30 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.70 NOMINAL |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 26.80 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 62.10 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 10.00 MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.3760 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 418.00 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 74.30 NOMINAL |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 104.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8620 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1000 INCHES MINIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
