Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 4061-13-01, a Moog Inc item with the NSN 5990009512482 that is listed alongside the description “Resolver Electrical.” If you are interested in part number 4061-13-01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 4061-13-01 is specifically listed with the NSN 5990-00-951-2482, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Moog Inc, this NSN part was specifically produced under CAGE Code 99932. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-951-2482 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 009512482 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10RX-0315-AZ | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.9760 INCHES MINIMUM AND 2.0390 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9270 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.2260 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHYF | SECURING HOLE QUANTITY | 2 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 36.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 264.00 MINIMUM AND 396.00 MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 54.40 MINIMUM AND 81.60 MAXIMUM |
| AJTA | ZRS RESISTANCE IN OHMS | 296.00 MINIMUM AND 444.00 MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 200.00 MINIMUM AND 271.40 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 37.40 MINIMUM AND 50.60 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 12.500 INPUT TO OUTPUT MINIMUM AND 16.500 INPUT TO OUTPUT MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.4690 INCHES NOMINAL |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 702.10 MINIMUM AND 949.90 MAXIMUM |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 204.00 MINIMUM AND 276.00 MAXIMUM |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 112.00 MINIMUM AND 168.00 MAXIMUM |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0938 INCHES NOMINAL |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.060 INCHES |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.3510 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
