Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5HADZ105-53, a Mpb Corporation item with the NSN 3110001515068 that is listed alongside the description “Bearing Ball Duplex.” If you are interested in part number 5HADZ105-53 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5HADZ105-53 is specifically listed with the NSN 3110-00-151-5068, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Mpb Corporation, this NSN part was specifically produced under CAGE Code 78118. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-151-5068 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 001515068 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5HADZ105-53 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.9449 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.9844 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.8504 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0014 INCHES MINIMUM RADIAL AND 0.0019 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M 65 TO P 250 DEG F,RETAINER SILVER-PLATED 0.0005 IN. TO 0.0015 IN. THK PER AMS 2412,ROCKWELL HARDNESS C SCALE60 TO 64 BALL,INNER AND OUTER RINGS,MAX SURFACE FINISH INNER AND OUTER RACEWAYS 8 UIN AA,ASSY RELAT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-23699 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | COPPER ALLOY RETAINER |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
| TEST | TEST DATA DOCUMENT | 02731-369A5432 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
