Request a Quote for 129766-01 Mpb Corporation Part With the NSN 3110-00-801-7718 Today

Part Number: 129766-01

Alternate P/N: 12976601

Manufacturer: Mpb Corporation

NSN: 3110-00-801-7718

NIIN: 008017718

Item Name : Bearing Ball Annular

CAGE Code: 40920

FSC: 3110 Bearings Antifriction Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 129766-01, a Mpb Corporation item with the NSN 3110008017718 that is listed alongside the description “Bearing Ball Annular.” If you are interested in part number 129766-01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 129766-01 is specifically listed with the NSN 3110-00-801-7718, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Mpb Corporation, this NSN part was specifically produced under CAGE Code 40920. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 129766-01 with NSN 3110-00-801-7718, 3110008017718

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-801-7718 Item PartTypeName: BEARING,BALL,ANNULAR	3110	008017718	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
PZ308ZAX41 0-28	2	2	3

Characteristics Data of NSN 3110-00-801-7718, 3110008017718

MRC	Criteria	Characteristic
AGFF	FLANGE WIDTH	0.0320 INCHES NOMINAL
AGZA	ALIGNMENT TYPE	RIGID
LBMA	LUBRICATION MATERIAL	OIL
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	S-2049-01,FSCM 35351 MFR REF SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL CORROSION RESISTING RETAINER
SFTT	SURFACE TREATMENT	PHOSPHATE BALL
SFTT	SURFACE TREATMENT	PHOSPHATE INNER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE OUTER RING
ABXV	BORE DIAMETER	0.1875 INCHES NOMINAL
AEPR	FLANGE OUTSIDE DIAMETER	0.8700 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.1562 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.1562 INCHES NOMINAL
AGVV	OUTER RING OUTSIDE DIAMETER	0.6250 INCHES NOMINAL
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGYK	SHIELD QUANTITY	2
AGZC	LOAD DIRECTION	ANGULAR
AGZD	BORE SHAPE	STRAIGHT
AKVV	INTERNAL CLEARANCE	0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.7
CTHY	CONTACT ANGLE	7.7 DEGREES MINIMUM AND 13.7 DEGREES MAXIMUM
FEAT	SPECIAL FEATURES	THREE RING ASSEMBLY CONSISTING OF SINGLE ROW BEARING WITHIN DOUBLE ROW BEARING; THREE EQUALLY SPACED HOLES THROUGH FLANGE ON 0.750 IN. NOM BOLT CIRCLE,0.083 IN. DIA MIN TO 0.085 IN. DIA MAX
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SEPARATOR SLUG
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RACE
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MATT	MATERIAL	STEEL SHIELD
SFTT	SURFACE TREATMENT	PHOSPHATE INNER RACE
SFTT	SURFACE TREATMENT	PHOSPHATE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE BALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE INNER RACE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SB1504,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE INNER RING