Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1B7112, a Napco International Llc item with the NSN 3020005171118 that is listed alongside the description “Gear Helical.” If you are interested in part number 1B7112 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1B7112 is specifically listed with the NSN 3020-00-517-1118, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Napco International Llc, this NSN part was specifically produced under CAGE Code 95201. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-517-1118 Item PartTypeName: GEAR,HELICAL | 3020 | 005171118 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1B7112 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 7.0000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 197.0 BRINELL STANDARD MINIMUM OVERALL AND 235.0 BRINELL STANDARD MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.198 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 39.5167 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.498 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.251 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.746 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.077 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.937 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.236 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 3.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 3800 PSI MIN TENSILE STRENGTH,0.094 IN. BY 30 DEG CHAMFER ON BORE 1ST END,KEYWAY 7 DEG 26 MIN 15 SEC CW FROM CENTER LINE OF GEAR SPOKE TO CENTERLINE OF KEYWAY,TIMING PUNCH MARK ON CENTER OF SPACE ON OPPOSITE SIDE FROM TURNED DOWN HUB |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
