INSTANT RFQ

Request a Quote for NAS1123-18H National Aerospace Standards Com Part With the NSN 5305-00-485-0913 Today

Part Number: NAS1123-18H
Alternate P/N: NAS112318H
NIIN: 004850913
Item Name : Screw Close Tolerance
CAGE Code: 80205
FSG: 53 Hardware and Abrasives
Country: USA
NCB Code: 00

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number NAS1123-18H, a National Aerospace Standards Com item with the NSN 5305004850913 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number NAS1123-18H and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number NAS1123-18H is specifically listed with the NSN 5305-00-485-0913, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number NAS1123-18H with NSN 5305-00-485-0913, 5305004850913

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-00-485-0913

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050048509130N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS1123-18H225

Characteristics Data of NSN 5305-00-485-0913, 5305004850913

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
AASBFASTENER LENGTH1.386 INCHES MINIMUM AND 1.416 INCHES MAXIMUM
AASKHEAD STYLEFLAT CHAMFER
AASLHEAD DIAMETER0.306 INCHES MINIMUM
AASUHEAD HEIGHT0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
AAUBHOLE DIAMETER0.038 INCHES NOMINAL
AAURGRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
AHYMNOMINAL THREAD DIAMETER0.192 INCHES
ANEEGRIP LENGTH1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH32
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CSYMSURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYMSURFACE FINISH32.0 MICROINCHES GRIP
CSYMSURFACE FINISH32.0 MICROINCHES THREADS
MATTMATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 5TH MATE
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

Related NSN Components of NAS1123 18H

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top