Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number NAS1351N8-40, a National Aerospace Standards Com item with the NSN 5305013598897 that is listed alongside the description “Screw Cap Socket Head.” If you are interested in part number NAS1351N8-40 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number NAS1351N8-40 is specifically listed with the NSN 5305-01-359-8897, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-359-8897 Item PartTypeName: SCREW,CAP,SOCKET HEAD | 5305 | 013598897 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1351N8-40 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASL | HEAD DIAMETER | 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNRF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 2.400 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| AASA | THREAD LENGTH | 1.500 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON PERPENDICULAR |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT CHAMFER |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ASXK | HOLE QUANTITY | 6 |
| CQBC | MINIMUM TENSILE STRENGTH | 16000 POUNDS PER SQUARE INCH |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
