Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AN45-4, a National Aerospace Standards Com item with the NSN 5306002607607 that is listed alongside the description “Bolt Eye.” If you are interested in part number AN45-4 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AN45-4 is specifically listed with the NSN 5306-00-260-7607, and this code can be used to determine that it falls under FSC 5306 Bolts. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-260-7607 Item PartTypeName: BOLT,EYE | 5306 | 002607607 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN45-4 | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.094 INCHES NOMINAL |
| AATR | SHANK LENGTH | 0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.688 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABHP | OVERALL LENGTH | 1.579 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.188 INCHES NOMINAL |
| CTWF | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.173 INCHES NOMINAL FIRST HOLE |
| CWXM | EYE OUTSIDE WIDTH | 0.688 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 A |
| SFTT | SURFACE TREATMENT | CADMIUM OR CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| STYL | STYLE DESIGNATOR | ROUND,CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
