Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AN46-30, a National Aerospace Standards Com item with the NSN 5306002652612 that is listed alongside the description “Bolt Eye.” If you are interested in part number AN46-30 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AN46-30 is specifically listed with the NSN 5306-00-265-2612, and this code can be used to determine that it falls under FSC 5306 Bolts. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-265-2612 Item PartTypeName: BOLT,EYE | 5306 | 002652612 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B6812 | 2 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.624 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.094 INCHES NOMINAL |
| AATR | SHANK LENGTH | 3.062 INCHES MINIMUM AND 3.109 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.096 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| ABHP | OVERALL LENGTH | 4.094 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 3.671 INCHES MINIMUM AND 3.673 INCHES MAXIMUM |
| CTWF | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 2.860 INCHES MINIMUM FIRST HOLE AND 2.892 INCHES MAXIMUM FIRST HOLE |
| CWXM | EYE OUTSIDE WIDTH | 0.750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATE |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ROUND,CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
