Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number NASM21297, a National Aerospace Standards Com item with the NSN 5306011308994 that is listed alongside the description “Bolt Shear.” If you are interested in part number NASM21297 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number NASM21297 is specifically listed with the NSN 5306-01-130-8994, and this code can be used to determine that it falls under FSC 5306 Bolts. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-130-8994 Item PartTypeName: BOLT,SHEAR | 5306 | 011308994 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NASM21297 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.925 INCHES MINIMUM AND 0.975 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.373 INCHES MINIMUM AND 1.403 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.404 INCHES MINIMUM AND 0.444 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.5805 INCHES MINIMUM AND 0.5815 INCHES MAXIMUM |
| AAZH | HEAD MINOR DIAMETER | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE 2 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
