Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number NASM21047L08K, a National Aerospace Standards Com item with the NSN 5310007797069 that is listed alongside the description “Nut Self Locking Plate.” If you are interested in part number NASM21047L08K and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number NASM21047L08K is specifically listed with the NSN 5310-00-779-7069, and this code can be used to determine that it falls under FSC 5310 Nuts and Washers. Additionally, while tracing back to National Aerospace Standards Com, this NSN part was specifically produced under CAGE Code 80205. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-779-7069 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 007797069 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R2000A08K | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| AAWY | COUNTERBORE DIAMETER | 0.168 INCHES MINIMUM NUT |
| ACTA | NUT STYLE | PLATE |
| ACVN | NUT LENGTH | 0.948 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.250 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.277 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| AZKQ | TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
| BZRR | THREAD SERIES | UNJC |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADEB | PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| ADFK | NUT COUNTERBORE DEPTH | 0.062 INCHES MINIMUM NUT |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
