Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 19302REV1, a National Steel Corp item with the NSN 5330008391273 that is listed alongside the description “Gasket.” If you are interested in part number 19302REV1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 19302REV1 is specifically listed with the NSN 5330-00-839-1273, and this code can be used to determine that it falls under FSC 5330 Packing and Gasket Materials. Additionally, while tracing back to National Steel Corp, this NSN part was specifically produced under CAGE Code 97933. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-839-1273 Item PartTypeName: GASKET | 5330 | 008391273 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 19302REV1 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.152 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| ADPW | OUTSIDE CORNER RADIUS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADUE | APERTURE WIDTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| ADUF | APERTURE LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| AECS | BOLT HOLE QUANTITY | 4 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| ABHP | OVERALL LENGTH | 2.350 INCHES MINIMUM AND 2.370 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| ADPQ | INSIDE CORNER RADIUS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.624 INCHES NOMINAL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM OVERALL AND 53.0 SHORE DUROMETER A MAXIMUM OVERALL |
| CTQW | MAXIMUM PRESSURE RATING | 95.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL AND RUBBER CHLOROPRENE CLASS CR OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-900 TY 1 CL1 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-G-1149 TY 1 CL 2 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
