Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 298106, a Navair And Navsea Managed item with the NSN 3020001580047 that is listed alongside the description “Gear Spur.” If you are interested in part number 298106 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 298106 is specifically listed with the NSN 3020-00-158-0047, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Navair And Navsea Managed, this NSN part was specifically produced under CAGE Code 10001. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-158-0047 Item PartTypeName: GEAR,SPUR | 3020 | 001580047 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T8000730PC2 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 3.1658 INCHES MINIMUM AND 3.1662 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 152 |
| ANTP | BORE STYLE | TAPERED W/KEYWAY FIRST END |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY,FIRST END |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES AXIALLY THROUGH BODY,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.206 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.156 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWSN | KEYWAY NOMINAL WIDTH | 0.063 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.133 INCHES FIRST END |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | 0.182 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWWH | END NOMINAL LENGTH | 0.063 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.094 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 1.625 INCHES FIRST END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.313 INCHES AXIALLY THROUGH BODY,FIRST END |
| FEAT | SPECIAL FEATURES | COUNTERBORE ON 2ND END,1.375 IN. DIA BY 0.062 IN. DEEP |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS1,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
