Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1166285, a Navair And Navsea Managed item with the NSN 5905002955142 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 1166285 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1166285 is specifically listed with the NSN 5905-00-295-5142, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Navair And Navsea Managed, this NSN part was specifically produced under CAGE Code 10001. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-295-5142 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 002955142 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1166285 | C | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 2 |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVL | PILOT DIAMETER | 0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 2.160 INCHES MINIMUM AND 2.240 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.187 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |
ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL |
ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM |
ADAV | OVERALL DIAMETER | 2.422 INCHES MINIMUM AND 2.558 INCHES MAXIMUM |
AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL |
AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
AKPV | MOUNTING FACILITY QUANTITY | 3 |
APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
AXGY | MOUNTING METHOD | CLAMP RING |
CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/0.15 ALL SECTIONS |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 ALL SECTIONS |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
TTQY | TERMINAL TYPE AND QUANTITY | 7 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote