Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 105067R1, a Navistar Intl Corp item with the NSN 5340007411094 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 105067R1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 105067R1 is specifically listed with the NSN 5340-00-741-1094, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Navistar Intl Corp, this NSN part was specifically produced under CAGE Code 89346. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-741-1094 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 007411094 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 105067R1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | STAMPED |
| AHLK | FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.531 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| ADLK | FIRST LEG LENGTH | 2.688 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 4.438 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.250 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 4.312 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1010 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
