Request a Quote for 10086695 Nimikkeistokeskus Ncb Finland Part With the NSN 5340-01-108-5297 Today

Part Number: 10086695

Manufacturer: Nimikkeistokeskus Ncb Finland

NSN: 5340-01-108-5297

NIIN: 011085297

Item Name : Bracket Double Angle

CAGE Code: A486G

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 10086695, a Nimikkeistokeskus Ncb Finland item with the NSN 5340011085297 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 10086695 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 10086695 is specifically listed with the NSN 5340-01-108-5297, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Nimikkeistokeskus Ncb Finland, this NSN part was specifically produced under CAGE Code A486G. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 10086695 with NSN 5340-01-108-5297, 5340011085297

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-108-5297 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	011085297	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10086695	6	9	6

Characteristics Data of NSN 5340-01-108-5297, 5340011085297

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	1.188 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	1.810 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
AHLF	SECOND LEG WIDTH	1.250 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.630 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.560 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.188 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.188 INCHES NOMINAL
AHPZ	CENTER SECTION HEIGHT	1.880 INCHES NOMINAL
AHQA	CENTER SECTION WIDTH	1.250 INCHES NOMINAL
AHQB	CENTER SECTION THICKNESS	0.188 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	1.250 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.620 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.312 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	CHANNEL P/N 12299741-1 CAGE 19207AND BAR P/N 12299741-2 CAGE 19207 ARE WELDED TO THE ITEM
MATT	MATERIAL	STEEL COMP 1015
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A108 MIL SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ADJACENT ANGLES