Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 123AMM50009, a Northrop Grumman Systems Corporation item with the NSN 3020003288192 that is listed alongside the description “Gear Worm.” If you are interested in part number 123AMM50009 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 123AMM50009 is specifically listed with the NSN 3020-00-328-8192, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Northrop Grumman Systems Corporation, this NSN part was specifically produced under CAGE Code 26512. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-328-8192 Item PartTypeName: GEAR,WORM | 3020 | 003288192 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 123AMM50009-11 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSA | SPLINE QUANTITY | 19 BOTH ENDS |
| AGJS | PITCH DIAMETER | 1.1600 INCHES NOMINAL |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.3958 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 29.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.268 INCHES |
| CWPC | THREAD FORM QUANTITY | 4 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | 25.0000 DEGREES |
| CWPZ | HELIX ANGLE | 11.9425 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.613 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 1.000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.449 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS BOTH ENDS |
| CWWH | END NOMINAL LENGTH | 0.344 INCHES BOTH ENDS |
| CWWN | END NOMINAL DIAMETER | 0.624 INCHES BOTH ENDS |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.050 INCHES BOTH ENDS |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.810 INCHES BOTH ENDS |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.219 INCHES BOTH ENDS |
| CWXL | SECOND STEP NOMINAL DIAMETER | 0.640 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AAMS 6470 NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | LUBRICANT OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16173,GRADE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
