Request a Quote for 04A061-12-066C Northrop Grumman Systems Corporation Part With the NSN 3120-01-333-9997 Today

Part Number: 04A061-12-066C

Alternate P/N: 04A06112066C

Manufacturer: Northrop Grumman Systems Corporation

NSN: 3120-01-333-9997

NIIN: 013339997

Item Name : Bearing Sleeve

CAGE Code: 76823

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 04A061-12-066C, a Northrop Grumman Systems Corporation item with the NSN 3120013339997 that is listed alongside the description “Bearing Sleeve.” If you are interested in part number 04A061-12-066C and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 04A061-12-066C is specifically listed with the NSN 3120-01-333-9997, and this code can be used to determine that it falls under FSC 3120 Bearings Plain Unmounted. Additionally, while tracing back to Northrop Grumman Systems Corporation, this NSN part was specifically produced under CAGE Code 76823. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 04A061-12-066C with NSN 3120-01-333-9997, 3120013339997

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-333-9997 Item PartTypeName: BEARING,SLEEVE	3120	013339997	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
KDP328-12-066C	5	1	5

Characteristics Data of NSN 3120-01-333-9997, 3120013339997

MRC	Criteria	Characteristic
AEPR	FLANGE OUTSIDE DIAMETER	1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
ABHP	OVERALL LENGTH	0.7220 INCHES NOMINAL
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE OUTSIDE RIGHT CORNER
MATT	MATERIAL	STEEL COMP 630 LARGEST OUTSIDE DIAMETER
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF BODY AND CHROMATE RIGHT END SURFACE OF BODY
ADAS	BODY INSIDE DIAMETER	0.7390 INCHES MINIMUM AND 0.7410 INCHES MAXIMUM
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF LEFT FLANGE AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END
ZZZK	SPECIFICATION/STANDARD DATA	80632-04A061 MANUFACTURERS STANDARD
ADAR	BODY OUTSIDE DIAMETER	0.9388 INCHES MINIMUM AND 0.9394 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY