Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number GH511BS12-0115, a Northrop Grumman Systems Corporation item with the NSN 4720000259375 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number GH511BS12-0115 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number GH511BS12-0115 is specifically listed with the NSN 4720-00-025-9375, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Northrop Grumman Systems Corporation, this NSN part was specifically produced under CAGE Code 26512. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-025-9375 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 000259375 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 124018-12CR-0115 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABJH | TEMP RATING | -100.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.281 INCHES MINIMUM AND 0.313 INCHES MAXIMUM 1ST END |
| ABKU | FLANGE THICKNESS | 0.281 INCHES MINIMUM AND 0.313 INCHES MAXIMUM 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.797 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.951 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.951 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.951 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.951 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 1.594 INCHES MINIMUM AND 1.610 INCHES MAXIMUM 1ST END |
| AFQN | FLANGE LENGTH | 1.594 INCHES MINIMUM AND 1.610 INCHES MAXIMUM 2ND END |
| AGFF | FLANGE WIDTH | 1.594 INCHES MINIMUM AND 1.610 INCHES MAXIMUM 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 1ST END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM 1ST END |
| AJEE | RAISED FACE DIAMETER | 1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 11.500 INCHES MINIMUM WORKING AND 11.750 INCHES MAXIMUM WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
