Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number LO3282, a Nott Co Industrial Products Div item with the NSN 5930011552519 that is listed alongside the description “Switch Rotary.” If you are interested in part number LO3282 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number LO3282 is specifically listed with the NSN 5930-01-155-2519, and this code can be used to determine that it falls under FSC 5930 Switches. Additionally, while tracing back to Nott Co Industrial Products Div, this NSN part was specifically produced under CAGE Code 61236. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-155-2519 Item PartTypeName: SWITCH,ROTARY | 5930 | 011552519 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 122412LD | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.250 INCHES NOMINAL 1ST MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ABHP | OVERALL LENGTH | 9.480 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 4.380 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.375 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.380 INCHES NOMINAL SINGLE ACTUATOR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 12 |
| AFCQ | KNOB MANUFACTURER CODE | 82121 |
| AFCY | KNOB MANUFACTURER PART NUMBER | A |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.280 INCHES NOMINAL 2ND MOUNTING FACILITY |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 3.810 INCHES NOMINAL 3RD MOUNTING FACILITY |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 2.280 INCHES NOMINAL 2ND MOUNTING FACILITY |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 EACH SECTION FRONT |
| AKPY | THROW QUANTITY | 4 EACH SECTION REAR |
| AXGY | MOUNTING METHOD | BRACKET AND THREADED HOLE SINGLE MOUNTING FACILITY |
| CBBL | FEATURES PROVIDED | ACTUATOR KNOB |
| CMLP | THREAD QUANTITY PER INCH | 20 SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| CQYJ | MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND SINGLE ACTUATOR |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSCF | TERMINAL TYPE | TAB W/SCREW |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 10.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO-011552519 |
| STYL | STYLE DESIGNATOR | TAP,CIRCUIT SELECTOR |
| THSD | THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
