Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 44-32324A01, a Obrien Gear Co item with the NSN 3020006823867 that is listed alongside the description “Gear Antibacklash Spur.” If you are interested in part number 44-32324A01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 44-32324A01 is specifically listed with the NSN 3020-00-682-3867, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Obrien Gear Co, this NSN part was specifically produced under CAGE Code 02184. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-682-3867 Item PartTypeName: GEAR,ANTIBACKLASH,SPUR | 3020 | 006823867 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44-32324A01 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSX | ATTACHMENT METHOD | INTERNAL RING GROOVE |
| AGJS | PITCH DIAMETER | 3.1250 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 150 |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.1666 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.530 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.551 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.875 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| CWWH | END NOMINAL LENGTH | 0.530 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.538 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.310 INCHES BOTH ENDS |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.021 INCHES SECOND END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.267 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.380 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.500 INCHES SECOND END |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.070 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 0.880 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 0.280 IN.CLAMPING SURFACE LG ON BOTH HUB ENDS AND 0.060 IN.WIDE 0.298 IN. DIA GROOVES ON BOTH ENDS,0.250 IN.FROM END |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
